ET Solar ETM53685 Instruções de instalação e montagem - Página 4
Procurar online ou descarregar pdf Instruções de instalação e montagem para Painel solar ET Solar ETM53685. ET Solar ETM53685 12 páginas. Solar modules
Imprimir página
located on the aluminum alloy frame, are provided for ease of installation. They are
designed to be used with metric M6×1(Torque 12 Lb-in) stainless steel screws.
Mounting with Bolts
•
The module must be attached and supported by at least four bolts through the
indicated mounting holes.
•
Most installations will use the four inner mounting holes on the module frame.
•
Depending on the local wind and snow loads, additional mounting points may be
required.
Mounting with Clamps
•
If module clamps are used to secure the module, the torque on the clamp bolt
should be around 8–10 Nm.
•
A minimum of four module clamps should be used, two on each long frame side,
in the general clamping areas denoted by the wide arrows on the drawing.
•
Depending on the local wind and snow loads, additional module clamps may be
required.
4