AKONA Exuma Jumper Manual do Proprietário - Página 9

Procurar online ou descarregar pdf Manual do Proprietário para Desporto & Ar livre AKONA Exuma Jumper. AKONA Exuma Jumper 16 páginas. Water trampoline

Imprimir página

A S S E M B L Y I N S T R U C T I O N S

IMPORTANT: Align the frame joints as close as possible to the junctions of the blue and

yellow panels. This placement prevents the hardware from rubbing against the tube.

At each of the frame holders on the tube, pull the strap over the frame,through both

stainless steel rings,and then back under the front ring. Do not fully tighten until all

straps are loosely in place around the frame. When all the straps are in place, and the

frame is evenly centered on the tube, tighten each securely, ensuring that the frame lies

flat against the tube in all directions.

ATTACH THE ANCHOR HARNESS TO THE FRAME

Follow the instructions included with the Exuma Anchor Harness. It is critically

important that the anchor harness is connected to the proper locations on the

trampoline frame in order to ensure proper function and performance of the anchoring

system, especially in high winds.

ATTACH THE JUMPING MAT

Lay the jumping mat inside the assembled frame with the warning labels of the mat

facing up.

Attach the mat to the frame by hooking one end of the spring to the V-ring on the mat

and the other end to the hole in the frame. Make sure that the hooks on each end of the

spring point down toward the ground and are fully inserted into the frame.

NOTE:

To ease the process, start by attaching a spring at one point on the frame. Working in

a clockwise direction, count the appropriate number of holes and V rings until you are

one quarter around the frame. Attach a spring. Repeat until your each your starting

point. Place one spring midway between each existing spring around the entire jump.

Repeat the process until all springs are on the jump.

O W N E R ' S M A N U A L