FlavorChef EP0030K Manual do utilizador - Página 15

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha FlavorChef EP0030K. FlavorChef EP0030K 16 páginas. Express kitchen system

Imprimir página

WARNING

THE GRATING BLADE IS VERY SHARP, USE CAUTION WHEN HANDLING.

Remove the Lid from the Master Jar.

10. Place the Circular Disc on top of the Spindle (see c. below).

11. Connect the Lid to the Master Jar (see d. below).

12. Turn the unit on.

13. Place the food to be processed into the Chute and using the Pusher move the food down the Chute towards

the Circular Disc.

USE ONLY THE PUSHER TOOL TO MOVE FOOD DOWN THE CHUTE. NEVER USE YOUR FINGERS

WARNING

FOR THIS PURPOSE AS SERIOUS PERSONAL INJURY CAN OCCUR.

NOTE: Use gentle force when pressing down on the food Pusher. Excessive force could cause damage to the the

Circular Disc.

14. Recommended setting for grating: 2

NOTE: The total operating time should not be longer than 1 minute.

Suggested Use

• Pesto with parmesan

• Cheesy quesadillas

Slicing/Grating/Julienne

Tip

Grater not recommended for soft cheese. For best results, place cheese in fridge for a few hours before grating.

Master Jar

Multi-Base

Circular Disc

attachments:

Coarse Grating

Fine

Grating*

*NOTE: The Fine Grating and the Thin Slicing (1.5mm/0.06") Blades are Optional Accessories that do not come with the

standard unit.

Using the Circular Disc

Make sure the unit is turned off and unplugged before use. You can plug it in only once all the

IMPORTANT

parts are assembled.

Connect the Multi-Base to the Master Jar (see "Connecting/Disconnecting Bases").

2. Connect the Master Jar (with Multi-Base) to the Motor Housing (see "Connecting the Master Jar to the Motor Housing").

Connect the Spindle to the Multi-Base (see a. below).

4. Prepare Circular Disc:

4.1.

Select the blade insert for slicing, grating or julienne .

4.2. Place the opening of the blade insert, over the central protrusion of the circular disc (see b. below).

4.3. Hook the blade insert onto the centre of the circular disc (see c. below).

4.4. Press the opposite end of the blade insert over the edge of the circular disc (see d. below).

WARNING

THE GRATING, JULIENNE AND SLICING BLADES ARE VERY SHARP, USE CAUTION WHEN HANDLING.

(Red)

Circular Disc

Motor Housing

Spindle (Black)

Julienne

Medium Slice

Thin

Slice*