eta eHACK Manual de Instruções - Página 16

Procurar online ou descarregar pdf Manual de Instruções para Caldeira eta eHACK. eta eHACK 20 páginas. Flue gas recirculation
Também para eta eHACK: Manual de Instruções (8 páginas)

Imprimir página

Configuration

Content of this configuration

Only the steps required for the configuration of this

product are described below. The configuration of the

complete heating system is described in the "Configu-

ration" manual supplied with the boiler.

Starting the configuration assistant

In the system settings,

to [Service], and open the system configuration menu

with the [Systems configuration] button.

Fig. 5-1: System configuration menu

Start the configuration assistant with the

the assistant] button.

Adjusting options in the function block [Boiler]

Select the required function block from the [Selected

function blocks] column:

Selected function blocks

HA-C 0

Boiler

Open the option and enable the following:

Electrostatic precipitator

Press the [Accept] button to save.

Adding a function block [Precipitator]

Select the required function block from the [Possible

function blocks] column:

Possible function blocks

EM-C 8

Precipitator

increase the authorization

[Starting

Add the function block and specify the boiler type in the

settings. Also enter the serial number of the boiler. This

is indicated on the type plate and is also visible in the

function block of the boiler.

Type of precipitator

Serial no. before .

Serial no. after .

Press the [Options] button to save the settings. There

are no other options to select. Press the [Accept]

button to save.

Establishing a [Flue gas] connection

Establish a new connection by pressing the button

[New connection] and select the connection type [Flue

gas] The producers and consumers must be specified

for these; see the following table.

Connections

Flue gas

Producers

HA-C 0: Boiler: Flue gas

Consumers

EM-C 8: Precip.: Flue gas

Further configuration and installation

Continue with configuration and installation of the

heating system as described in the "Configura-

tion" manual supplied with the boiler.

www.eta.co.at

Configuration

eHack 20-45 kW or

eHack 50-80 kW