Fleetminder platinum nxtg Manual de instalação - Página 9

Procurar online ou descarregar pdf Manual de instalação para GPS Fleetminder platinum nxtg. Fleetminder platinum nxtg 12 páginas.

Imprimir página
LED Troubleshooting
The Fleetminder NXTG has LED indicators on the front of the
device, that can be used for diagnosis of the device. They explain
the functionality of the device by their status explained below.
On solid state
Flashing
RED LED
- On/Off every second
(Power
Indicator)
Off
Flashing

YELLOW LED

On but not flashing
(GSM/GPRS
Indicator)
Off
On
Off
GREEN LED
(GPS Indicator)
fleetminder Installation Manual
Installation Manual
Unit powered by main power
Unit operating under backup battery (check vehicle
power supply)
There is no power to the unit (check fuse, and
connection of the red and black wires.)
Unit is registered on the network, and connected to
the tracking server.
Unit is registered on the network, but not connected
via GPRS. – The unit is unable to connect to the server.
If the LED comes on solid, and stays on solid for a
period of about
1 ~ 2 minutes, then turns off for 30seconds, before
turning on again, this means that the device has weak
GSM signal, and it is trying to acquire GPRS.
Means the device is unable to register onto the
network. Please ensure the sim card is inserted
correctly. And that the sim card is valid, and activated
(Can be checked by trialing the sim in a mobile
phone). In case there is a pin on the SIM card, please
ensure that the pin is removed (this can be done when
a sim card is inserted in a phone, by accessing the
security menu.)
The device is able to get a current GPS location.
The device is unable to get a current GPS fix. Please
check the antenna location, and ensure that it has a
clear view of the sky.
Page 7