AKOS Mercury M Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Lareira de interior AKOS Mercury M. AKOS Mercury M 20 páginas. Insert fireplace

− It is not allowed to add different or more materials to the combustion chamber. Always keep the
pilot burner free from decorative material!
DO NOT BLOCK THE PILOT FLAME HOLE
HOLE by placing decorative material on the pilot flame hole, do not block the pilot flame hole by
placing imitation embers on the pilot flame hole, do not block the pilot flame hole by placing
decorative logs on the pilot flame hole, DO NOT BLOCK THE PILOT FLAME HOLE by placing
pebbles on the pilot flame hole, do not block the pilot flame hole by placing anything on the pilot
flame hole – the pilot is located lower than the burner, thus blocking the pilot flame will result in
failure to ignite the gas in the fire place, therefore under any condition
THE PILOT FLAME HOLE!!!
− Do not toss all the decorative material onto the burner all at once; instead place it accurately
upon the burner, in order to prevent obstruction of burner by dust particles.
− Placing of decorative material should be done by the qualified, skilled, experienced, trained
professionals only.
− Place the decorative material according to the attached decorative material placement manual.

Imitation logs

a. Place a number of the Vermiculate charcoals onto the burner and on the cover plate
b. Place the imitation logs according to the following instructions: it is possible to place the
logs as user's decision, follow the main limitations, do not place the logs on each other by
more than one cross. In case of placing decorative logs by more than one cross, soot
could be covering the logs. Do not place any log on top of the pilot burner, make sure
there is no any block between the pilot flame and burner gas outlet.
c. Divide the remainder of the Vermiculate charcoals over the burner and the cover plate.
Avoid a thick layer onto the burner, this has a negative effect on the fire image.
d. Ignite the pilot and main burner according to the instructions in the user's manual.
e. Assess whether the flame division is correct. If necessary, move the chips until there is a
proper division of flames.
f.
Place the glass and check the fire image.

Pebbles

a. Place the pebbles on the burner and the cover plate (see fig. 3.3 or imitation logs instruction
card supplied). Avoid a double layer; this has a negative effect on the fire image.
b. Place the glass and check the fire image.
AKOS Sp. z o o.
ul. Bruszewska 22, 03-046 Warszawa
NIP: 5361925006; REGON 365653140
Tel: +48881697975; email: [email protected]
, DO NOT BLOCK THE PILOT FLAME
DO NOT BLOCK
14 <
<
<
<