DOD Is200W Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Câmaras de tração DOD Is200W. DOD Is200W 20 páginas.

INTRODUCTION OF OTHER FUNCTIONS

Loop Recording (default)

Loop Recording can be set at 2/3/5 minutes, it means that the video clip intervals will

be set at 2/3/5 minutes long and after memory card is full, the oldest video clips will be

deleted and new video clips will take its place.

If Loop Recording is turned off, it will stop recording when the memory card is full.

G-Sensor (default at Middle)

When the internal G-Sensor detects situations like an impact, intense bumps or

hard brakes during Recording Mode, the unit will automatically lock the current

recording to avoid being replaced by loop recording.

Motion Detection

In Motion Detection Mode, the surrounding of where the car is parked will be

recorded taking the least amount of storage space. Recording will automatically

be turned off after 10 seconds if nothing happens during the monitor mode. Once

there is movement, the unit will start recording immediately.

* The Motion Detection Mode requires the camera to be connected to a constant

power supply.

When Motion Detection Mode is activated, Monitor Mode/Emergency Recording

Mode and the G-Sensor function will automatically be turned off.

Plate Stamp

Enter your license plate number or desired input, and it will be displayed on the

video footage.