FLENDER ZAPEX Manual de Instruções - Página 7

Procurar online ou descarregar pdf Manual de Instruções para Equipamento industrial FLENDER ZAPEX. FLENDER ZAPEX 16 páginas. Couplings

Notes

2.1

All persons involved in the installation, operation, maintenance and repair of the

coupling or clutch must have read and understood these instructions and must

comply with them at all times. Disregarding these instructions may cause damage to

the product and material and/or injury to persons. Damage caused by disregard of

these instructions will result in exclusion of liability.

During transport, installation, dismantling, operation and maintenance of the unit, the relevant safety and

environmental regulations must be complied with at all times.

When using lifting gears and load equipment for handling the components they must

be suitable for the weight of the coupling.

Depending on national regulations, coupling and clutch components may have to be disposed of

separately or separated for recycling.

The coupling must be stored in a dry environment. Adequate preservation must be carried out.

Operators and users must not make any changes to the coupling themselves over and above the treatment

specified in these instructions.

If there is any visible damage the coupling or clutch must not be fitted or put into

operation!

The coupling must not be operated unless housed in a suitable enclosure in accordance with the standards

applying. This also applies to test runs and when checking the direction of rotation.

All work on the coupling must be carried out only when it is at a standstill. Secure the drive unit to prevent

unintentional switchon. A notice should be attached to the ON switch stating clearly that work is in

progress.

In addition to any generally prescribed personal safety equipment (such as safety shoes, safety clothing,

helmet) suitable safety gloves and suitable safety glasses must be worn when handling the coupling

or clutch!

Only spare parts made by the manufacturer Flender must be used.

Any enquiries should be addressed to:

ZAPEX 3505 en

Operating instructions 10/2017

Flender GmbH

Schlavenhorst 100

46395 Bocholt

Tel.:

+49 (0)2871 / 92-0

Fax:

+49 (0)2871 / 92-2596