3M 07023 Instruções para o utilizador - Página 2

Procurar online ou descarregar pdf Instruções para o utilizador para Produto respiratório 3M 07023. 3M 07023 2 páginas. Particulate respirator n95

Imprimir página

FITTING INSTRUCTIONS

Must be followed each time respirator is worn.

1. Cup the respirator in your hand, with the

nosepiece at your ﬁ ngertips, allowing the

headbands to hang freely below your hand.

REMOVAL INSTRUCTIONS

See step 2 of Fitting Instructions and cup respirator in hand to maintain position on face. Pull bottom strap over head. Still holding respirator in position, pull top strap over head and

remove respirator.

NIOSH Approved: N95

At least 95% ﬁ ltration efﬁ ciency against solid

and liquid aerosols that do not contain oil.

THIS RESPIRATOR IS APPROVED ONLY IN THE FOLLOWING CONFIGURATION:

TC-

84A-4271

1. PROTECTION

N95-Particulate Filter (95% filter

efficiency level) effective against

particulate aerosols free of oil; time

use restrictions may apply

2. CAUTIONS AND LIMITATIONS

A - Not for use in atmospheres containing less than 19.5 percent oxygen.

B - Not for use in atmospheres immediately dangerous to life or health.

C - Do not exceed maximum use concentrations established by regulatory standards.

J - Failure to properly use and maintain this product could result in injury or death.

M - All approved respirators shall be selected, fitted, used, and maintained in accordance with MSHA, OSHA, and other applicable regulations.

N - Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration as specified by the manufacturer.

O - Refer to users instructions, and/or maintenance manuals for information on use and maintenance of these respirators .

P - NIOSH does not evaluate respirators for use as surgical masks.

2. Position the respirator under your chin with

the nosepiece up. Pull the top strap over your

head resting it high at the top back of your

head. Pull the bottom strap over your head and

position it around the neck below the ears.

Protection

N95

3. Place your ﬁ ngertips from both hands at the

top of the metal nosepiece. Using two hands,

mold the nose area to the shape of your

nose by pushing inward while moving your

ﬁ ngertips down both sides of the nosepiece.

Pinching the nosepiece using one hand

may result in improper ﬁ t and less effective

respirator performance. Use two hands.

Respirator

8200

Learn more about masks and respirators we have.

4. Perform a User Seal Check prior to each

wearing. To check the respirator-to-face

seal, place both hands completely over the

respirator and exhale. Be careful not to

disturb the position of the respirator. If air

leaks around nose, readjust the nosepiece

as described in step 3. If air leaks at the

respirator edges, work the straps back along

the sides of your head. If you CANNOT

achieve a proper seal, DO NOT enter the

contaminated area. See your supervisor.

Cautions and Limitations

ABCJMNOP