DOD VoFX Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Hardware informático DOD VoFX. DOD VoFX 16 páginas. Vocal fx processor/mic pre

Signal Processing

3) Press the Store button again to store the Program in the location you select

ed.

After the storing procedure is complete, the VoFX returns to normal operation

at the new Program location.

NOTE: Factory Programs can't be overwritten. When you modify a factory

Program and store it in memory, the Program is stored in the corresponding

number location in the User Program section.

Grouping Programs

If you have Programs that you like and would like to keep them together in the same Bank, the VoFX will allow

you to store any program in any bank

To perform this function, simply move to the desired program, either using the Data Wheel or the

Footswitches, and then press the <Store> button once. The <store> LED will begin to flash. Now use the

<Data Wheel> and turn it until the desired location for that Program appears in the display. Once there,

simply press the <Store> button again and that program will now be in that location.

Bypassing

The VoFX's bypass functions are very simple.

To bypass individual effects:

1) From Performance mode, decide which effect you want to bypass and press its

Select button twice. The display reads:

-- .

To bypass programs:

From Performance mode, press and hold the <Bypass> footswitch and the LED will light indicating that the

currently selected program is now bypassed.