Etac Molift MRS Quattro Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Ajuda à mobilidade Etac Molift MRS Quattro. Etac Molift MRS Quattro 16 páginas.

Molift MRS Quattro / www.etac.com

Cleaning and disinfection

Clean on a regular basis. Clean surfaces with
a damp cloth using an appropriate pH-neutral
detergent. Do not use solvents or strong liquids,
this may damage surfaces. Disinfection when
needed; use isopropyl alcohol. Avoid abrasive
cleaning products.
Make sure not to damage or
remove labels when cleaning.

Reconditioning

MRS Quattro can be re-used. Follow assembly
instruction to dismount and re-assembly.

Periodic Inspection Scope

Periodic inspection is a visual examination
(particularly of the MRS Quattro structure, bolts
and person-support devices according to Periodic
Inspection Report for MRS Quattro. This can be
found on www.etac.com.
In the event of danger to safety,
the MRS Quattro shall immediately
be taken out of service and marked
clearly with "out of order" and
shall not be used until the MRS
Quattro is repaired
Periodic Inspection shall be performed at least
once a year or more frequently if required by local
requirements. The inspection should be performed
by service personnel authorized by Etac. Contact
Etac for training and authorization or recommen-
dation of an approved service partner.
When performing a periodic inspection, the
inspector shall fill out the inspection report for
MRS Quattro. The reports should be retained by
the person(s) responsible for servicing the hoist. If
the inspection reveals defects and damages, the
owner shall be notified and a copy of the report
should be sent to Etac, [email protected].

Maintenance

Recycling

MRS Quattro can be disposed of as metal waste
without battery charger. Battery charger must be
removed and disposed of as Electrical equipment.

Spare Parts

A list of spare parts is available on request.

Periodic Inspection

When periodic inspection is completed the inspec-
tor shall mark the MRS Quattro with a sticker on
the control label showing the date when periodic
inspection is performed and a label (with 6-digit
ID from Etac or distributor) showing who has per-
formed the periodic control. The control label can
be found on the post, and this will then indicate
when next service should be performed.
13
Mark label
with month
and year of
inspection