3M 4000 Series Manual - Página 4

Procurar online ou descarregar pdf Manual para Produto respiratório 3M 4000 Series. 3M 4000 Series 4 páginas. Reusable half face masks

Fit Check

Perform a positive pressure fit check each time the respirator is

donned.

Positive pressure Face Fit check

Fitting instructions must be followed each time the respirator is

worn.

1. Place the palm of the hand over the exhalation valve cover and

exhale gently.

2. If the respirator bulges slightly and no air leakage between

the face and the respirator is detected, a proper fit has been

achieved.

3. If air leakage is detected, re-position the respirator on the

face and/or readjust the tension of the strap to eliminate the

leakage.

4. Repeat the above face fit check

5. If you cannot achieve a proper fit, do not enter the

contaminated area. See your supervisor

3M Personal Safety Division

EMEA Region

3M Centre,

Cain Road, Bracknell

Berkshire RG12 8HT

United Kingdom

Tel: +44 (0) 1344 858000

www.3M.eu/safety

Important Notice

3M does not accept liability of any kind, be it direct or

consequential (including, but not limited to, loss of profits,

business and/or goodwill) arising from reliance upon any

information herein provided by 3M. The user is responsible for

determining the suitability of the products for their intended

use. Nothing in this statement will be deemed to exclude or

restrict 3M's liability for death or personal injury arising from its

negligence.

3M is a trademark of 3M company.

16755