Clinton 3030 Instruções de montagem - Página 4

Procurar online ou descarregar pdf Instruções de montagem para Equipamento médico Clinton 3030. Clinton 3030 4 páginas. Treatment tables with adjustable backrest or non-adjustable top

Imprimir página

3020 SHELF ASSEMBLY

Invert table to upright position and apply 4

adhesive backed hook and loop strips to top

edge of H-braces. Place the full-length shelf on the spanner

with the loop strip underside over the hook strips on the

braces.

3030 TIER SHELF ASSEMBLY

With table in the upright position, place the

full-length shelf into position under the table

(see step 10). Using assistance, place tier shelf on the full

shelf, aligning it with the end of the shelf that has the

pre-drilled holes. (See photo below)

MODEL 3030

Clinton Industries warrants manufactured products to be free of defects in materials, workmanship or design

under normal use for five years on all mechanical products and two years on all electrical components from

the date of purchase. This warranty does not include damage resulting from accident, abuse or misuse, alteration, or

negligence of the product and expressly excludes normal wear of parts (including but not limited to vinyl). Contact

Clinton for full warranty details. ANY ALTERATIONS TO OUR PRODUCTS VOIDS ALL WARRANTIES AND CLAIMS.

Clinton products are built to be durable. With proper care, your Clinton equipment will provide years of

superior looks and performance.

sanitation. NEVER use abrasive scrubbing agents that may scratch the surfaces.

try them on a small inconspicuous area to insure that they will not harm the any surface.

Damage from cleaning is not covered under the warranty. Do not use alcohol based cleaning agents.

Periodically check that all fasteners are secure and operating properly.

Adhesive-backed hook strips

Warranty

Care & Cleaning

Clean table with a soft cloth and any mild cleaning agent that may be required for

MODELS 3013

3013 DRAWER ASSEMBLY

With table in the upright position, place the full-

length shelf into position under the table (see

step 10). Remove the drawers and place the drawer casing

into position aligning it with the end of the shelf that has

the pre-drilled holes. Fasten unit by screwing the supplied

" black truss head screws through shelf and into

pre-inserted, threaded inserts. (See photo below).

Before using any cleaning agents,

800-441-9131 • 717-848-3519

Toll-Free Fax 866-522-1233

Fax 717-843-5871

www.clinton-ind.com

Limited Warranty

ON FRAME &

ELECTRICAL

COMPONENTS

Limited

Warranty

CLI-MA-013