CanMore GT 740 FL Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para GPS CanMore GT 740 FL. CanMore GT 740 FL 10 páginas. 48 channels, with data logger function

Imprimir página

2) Install USB driver, users can find the USB driver on the attached DVD (file name: GPS USB Dongle driver), the USB driver can be

installed for Microsoft Windows, XP, Vistar , Linux and Mac system. User can easily install USB driver, the USB driver can automatically

install the driver when user execute it.

3) Turn on Laptop/UMPC, please identify which COM port has been used (occupied) by USB GPS Dongle. The ways how to check COM

port has been used by GPS USB Dongle are as following ; Double clicks "Control panel ( C )" Double clicks "System" Click

"hardware" Click "Hardware Manager" Double clicks "COM

Port", then user can find which COM port has been occupied by GPS

USB Dongle.

4) Connect the GPS USB Dongle and then make sure baud rate set at 38400 bps (The baudrate of production is 38400) in your

application program.

5) Load your GPS mapping or routing software, along with the corresponding maps of the areas that you are occupying or plan to travel.

Start the application. Make sure the application is set for the COM port that your Laptop/UMPC device will use for serial communication.

Now you should be ready to use your GPS application as directed by the user documentation that came with the software. More

configurations may be necessary.

6) eMap will search GPS satellites automatically, users' current position will be showed in the eMap after 3 satellites has been

searched.( In firstly use of this GPS USB Dongle, we strongly recommend you to bring your GPS USB Dongle receiver outdoor or open

sky at least 15~20 minutes for sure 3D position fixed and almanac updated.). See Fig 1.1

7) How to identify GPS USB Dongle working status, please read the following description LED Indicator.