Clinton Electronics CE-CC110 Manual - Página 17
Procurar online ou descarregar pdf Manual para Câmara a cores Clinton Electronics CE-CC110. Clinton Electronics CE-CC110 19 páginas.
Imprimir página■ Troubleshooting
If there are problems with the camera operation, check the tables below. If
the problem persists, please contact the agent who supplied the product.
Problems
Nothing appears on the
ㆍCheck the power connection.
screen.
ㆍCheck the video signal line connection.
ㆍCheck and make sure that the auto lens switch
is correctly set to DC or VIDEO depending on
the type of lens attached.
The video image is not
ㆍMake sure that the lens is clean.
clear.
Clean the lens with a clean lint free cloth or
brush.
ㆍAdjust the contrast control on the monitor.
ㆍMake sure that the screen is not exposed
directly to a bright light.
Re-position the camera if necessary.
ㆍRe-adjust the back focus of the camera.
The screen is dark.
ㆍ Adjust the contrast control of the monitor.
ㆍ If there is an intermediate device, set the75ohm
Hi-z correctly, and also check the connections.
ㆍ Check if an auto iris lens is being used and if
necessary adjust the brightness level.
ㆍPlease check if an appropriate power source to
There is a problem with
the camera complies with the manufacturer's
the camera operation.
standard requirement, or if the voltage is
The camera surface is
fluctuating. Check for ground loops.
too hot and black stripes
appear on the screen.
30
High Resolution Color Camera
Troubleshooting
Problems
The MOTION
ㆍCheck if 'MOTION DETECTION' mode is
DETECTION function is
turned on.
not working.
ㆍCheck the setting of the MD AREA.
ㆍCheck the 'WHITE BAL' setting .
Colors are not quite
right.
ㆍCheck if the camera is facing directly into
The screen is
sunlight or fluorescent light.
flickering.
ㆍCheck if an auto iris lens is being used.
ㆍCheck the connection of the lens connector
cable.
L/L mode cannot
ㆍHave you connected your camera to DC power
be selected.
source? Connect it to AC power source.
ㆍCheck the frequency of power supply
L/L mode is not
(60Hz for NTSC, 50Hz for PAL).
available.
ㆍCheck if the AGC menu is set to the OFF
COLOR mode is not
position.
working.
ㆍCheck if the AGC menu is set to the OFF
SENS-UP function is not
position.
working.
ㆍCheck if the SHUTTER menu is set to
MANUAL mode.
Troubleshooting
31
High Resolution Color Camera