CLINTON INDUSTRIES 80110 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Equipamento médico CLINTON INDUSTRIES 80110. CLINTON INDUSTRIES 80110 16 páginas. Open base, power, changing table
Imprimir páginaWEIGHT LIMIT
Clinton Open Base, Power, Changing Table is specifically designed to be used by medical and care
professionals for changing of soiled garment or other incontinence briefs where the table load
capacity or combined load and force does not exceed 400 pounds (181 kg).
WARNING
To reduce the risk of injury due to electrical shock, burns or fire follow the following procedures:
• Unplug the table before cleaning
• Unplug the table before adding accessories or removing and replacing parts
• Do not use the table if it has been damaged in any way, especially the electrical connection
• Unplug the table and do not use if the table has been in or damaged by water or excessive moisture
• Keep cord away from heat or surfaces that may become hot
• Do not modify this equipment without authorization from Clinton Industries
• Mains plug is used as primary means of disconnect. Do not position the equipment such that it is
difficult to operate the disconnection device.
• Not intended for outdoor use
• Never operated where aerosol sprays, oxygen or other potentially flammable products are being used
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to other devices in the vicinity. However,
there is no guarantee that interference will not occur in a particular installation. Harmful interference to
other devices can be determined by turning this equipment on and off. Try to correct the interference
using one or more of the following:
• Reorient or relocate the receiving device
• Increase the separation between the equipment
• Connect the equipment to an outlet on a different circuit from that to which the other device(s) are
connected and consult the factory field service technician for help
• Consult Clinton Industries for help
• Care must be taken when operating this equipment around other equipment to avoid reciprocal
interference. Potential electromagnetic or other interference could occur to this or to the other
equipment. Try to minimize this interference by not using other equipment in conjunction with this
device.
DANGER
Risk of Electrical Shock.
Always connect these tables to a properly grounded 120V outlet.
The power supply and controller contains no serviceable parts. If failure occurs, unplug the table from
the wall outlet and contact Clinton Industries, or your local Clinton distribution office.
ExamTablesDirect.com
Shop tables & accessories at
IMPORTANT SAFETY GUIDELINES
4