Etac N10200 Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Sistemas de elevação Etac N10200. Etac N10200 19 páginas.

Molift Smart 150 | BM09299 Rev C | www.etac.com

Transfer

Try to position the user as low as possible (prefer-

ably resting the feet on the chassis) when transfer-

ring the hoist with a suspended user. In this way

the centre of gravity will be low and reduce the

risk of instability.

Never lift the user higher than

necessary to carry out a lift.

Remember that wheels on a mobile

lift must NOT be locked.

Never leave a user unattended in a

lifting situation.

Be careful during movement, the suspended user

may swing during turns, stops and starts. Be

careful when manoeuvring close to furniture to

prevent the suspended user from colliding with

these objects.

The hoist shall not be used to lift or

move users on sloping surfaces

Avoid deep pile carpets, high thresholds, uneven

surfaces or other obstacles that may block the cas-

tors. The hoist may become unstable if forced over

such obstacles increasing the risk of tipping over.

Lowering into sitting

When transferring the user into sitting, the follow-

ing techniques can be used when lowering the

user as far back into the seat as possible:

A Position the user with the help of the push

handle

B Push gently on the user's knees

C Tilt the seat backwards

User must be facing hoist when

lifting or lowering from or into a

chair.