1010 Music Bitbox Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de gravação 1010 Music Bitbox. 1010 Music Bitbox 11 páginas.
Também para 1010 Music Bitbox: Manual de início rápido (2 páginas)

Imprimir página

Pitch

Start

Length

Dest

This parameter specifies the destination cell that is the target of the

Pitch

Column format as shown to the right. Note that 1,1 is in the lower left

corner, and 4,4 is in the upper right.

Working with Presets and Saving Your Work

Bitbox allows you to store multiple configurations of clips and parameter settings as

Presets

. You can save up to 12 different banks of

using bitbox, you are using

Presets

pre-loaded.

To switch to using a different

get to the

screen shown on the right.

To load a Preset, touch the

Presets

are automatically saved on the microSD card as you work. If you change to a different card, you will

have a different set of

Presets

replaced with the settings of the newly selected

NOTE

Presets are saved automatically in the background. You don't need to worry about saving your

•

changes whenever you adjust something.

It can take up to 10 seconds for the most current state to be written to the microSD card.

•

Working with Tracks

Track Properties

To access the

repeatedly to return to the

Track Selection

P. 8

v. 1.0

Use the CV Modulator input to modulate the pitch of the Destination cell

specified in the

Modulate the initial play position in the sample for the Destination cell.

Modulate the playback length for the Destination cell.

Start

Length

, and

Preset 1

. The MicroSD card that comes with bitbox has

Preset

, press the HOME button repeatedly until you

Presets

button. This will lead to the

To load a

Preset

You will then be taken to the

information that was previously saved for this Preset:

For each clip cell

For each modulation cell the parameters and destination cell

For each track

. When you switch to a different

screen, press the HOME button

screen and press

screen shown to the right.

Dest

parameter.

modulation. It is expressed in Row,

Presets

. When you first start

Presets

, press the number of the

Main

screen. This will load the following

the sample assignment and all parameters

all track parameters

Preset

, which may be blank.

Tracks

. You will see the

Bitbox User Manual

4,1

4,2

4,3

3,1

3,2

3,3

2,1

2,2

2,3

1,1

1,2

1,3

screen shown below.

Preset

you would like to load.

, all previous settings will be

4,4

3,4

2,4

1,4