DOEPFER A-107 Manual - Página 8

Procurar online ou descarregar pdf Manual para Sistemas de filtragem de água DOEPFER A-107. DOEPFER A-107 18 páginas. System a - 100, multitype morphing filter

Imprimir página

A-107

Multitype Morphing Filter

4 Chain

Operating this button calls up a chain from the me-

mory, i.e. the chain is copied from the non-volatile

memory into the working buffer. To avoid wrongly

operation one has to keep the button pressed for about

one second before the function is executed.

The display shows the number of the last chain in use

(e.g. C23) and the right decimal flashes slowly as a

warning that the chain in the working buffer will be

overwritten if the process is continued.

If the chain button was operated wrongly one simply

has to operate the Step button 2 or the Filter button 3

to reach the corresponding display mode.

How to copy a chain from the memory into the working

buffer:

Select the number of the desired chain by

means of the Value control 6.

Operate the Chain button again and hold it

pressed for about 2 seconds.

GET

During this time the right decimal points flashes

fast and the display shows GET.

If you release the chain button while the display

shows "GET" the copy procedure is interrupted

and the right decimal point flashes slowly again.

System A - 100

After about 2 seconds the chain is copied from the

non-volatile memory into the working buffer.

5 Prog

Operating this button stores a chain into the memory,

i.e. the chain is copied from the working buffer non-

volatile memory. To avoid wrongly operation one has

to keep the button pressed for about one second

before the function is executed.

The display shows the number of the last chain in use

(e.g. P19) and the right decimal flashes slowly as a

warning that the chain in the memory will be overwrit-

ten if the process is continued.