DOF Reality M2 Instruções de configuração - Página 14
Procurar online ou descarregar pdf Instruções de configuração para Acessórios para videojogos DOF Reality M2. DOF Reality M2 15 páginas.
Também para DOF Reality M2: Instruções de configuração (14 páginas)
Imprimir página
5.4 Something is wrong with my platform!
1) Check all cables and motor connections, including any loose wires inside the control box.
2) Close and exit SimRacingStudio.
3) Download
http://dofreality.com/SMC3Utils.zip
4) Unzip all contents into any local folder on your PC.
5) Open SMC3Utils.ini with notepad and set COMM_PORT= to the correct COM port number
from your Windows Device Manager (see 5.1). Each control box should have a specific port
number. Test one box at a time.
6) Start/run SMC3Utils.exe. If you are getting an error message regarding the COM port
communication, you have not set the port number properly in the previous steps.
7) Power ON the platform
8) Set it to 'sine' click Motor 1 and Motor 2 and 3 email the screenshots of the SMC Util charts
for each motor to [email protected]. It will also be helpful to include a short video clearly
demonstrating the problem at this time too.
5.5 I have trouble installing SRS (Antivirus detects it as a threat)
SRS uses a variety of methods to read the telemetry from the game and some of those methods
will trigger antivirus software. SRS is completely safe, configure your antivirus software to allow
an exception for SRS. This will typically solve the problem.
5.6 Simulator does not move in-game
Make sure the SRS application is open and running in the background. This connects the
simulator to your gaming software. If you have already confirmed this, click the "Auto
Install" button from within the SRS Game section. For some games, you will need to
adjust the game settings following this guide:
https://www.simracingstudio.com/download.
If you have completed all this, and your platform still does not move, please Open a
Ticket by contacting [email protected].
5.7 Simulator used to work in the game, but stopped
This can happen if the connection is lost to the computer or Windows Defender (or other
antivirus software) have deemed the software a threat. Windows Defender is notorious for this.
Please investigate with your antivirus software. Usually, an SRS reinstall fixes this or you can add
an exception for SRS from within your antivirus software application.
5.8 The motors make small adjustments all the time
This is because the motors always have power flowing through them and are always in a ready
state to be able to move the rig quickly without delay. The small movements of the motors will
typically disappear when there is weight on the rig, or it is in use.
14
Setup Instructions DOF Reality M2