Canoga Perkins L357 ESU Manual de início rápido - Página 7

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Canoga Perkins L357 ESU. Canoga Perkins L357 ESU 8 páginas.

Imprimir página

Canoga Perkins Corp.

Model L357-1564 V02.00 F19

----------------------------------FUNCTIONAL CONFIGURATION----------------------

Chassis/Slot

User Port Speed/Duplex

Switch Settings:

User Port Speed/Duplex

Side Band Mgmt

LLF Extension to User

LLF User to Extension

1) Configuration Option Control Software

2) User Port Setting

3) Ext Port Setting

4) RMTF

5) Link Loss Echo

6) Link Loss Fwd

Select [1-6]:

------------------------------------Messages------------------------------------

Alarm Outputs: None

Step 7: Cable Connection

Once the changes are made to the modules, the UTP (Unshielded Twisted Pair) or fiber optic

cables can be installed. Remember that the USR port is the port connected to your local/client

device and the EXT port is the port facing the network/trunk. Connect the fiber to the EXT port.

Step 8: IP Address/Subnet Mask/Default Gateway Set-up

From the System Configuration menu, type "5" then "enter" to access the IP/VLAN

Configuration screen. To configure the IP address, select "5," press "enter," and type the IP

address you wish to assign to the unit. Press enter to accept the changes. The Subnet Mask and

Default Gateway must be entered at this point as well.

Canoga Perkins Corporation, 20600 Prairie Street, Chatsworth, CA 91311-6008

Phone: (818) 718-6300, FAX (818) 718-6312 www.canoga.com

P/N 6942590 Rev A

EdgeAccess Ethernet Media Converter

Standalone

Local

Standalone

Link Down

Autonegotiate

Disabled

100M/Full

1000M/Full

Disabled

Figure 11. Functional Configuration screen

Figure 12. Fiber optic and UTP cable connection

30-Nov-2005

09:31:28

Remote

Offline

Page 7 of 8