CYKLOP C-2 Manual - Página 2

Procurar online ou descarregar pdf Manual para Unidade de controlo CYKLOP C-2. CYKLOP C-2 4 páginas. Universal central locking control unit

MANUAL

1. LOCK:

Press the lock button on the remote control, the lights will blink once, and the door

will lock. The LED will start blinking

2. UNLOCK:

Press the unlock button on the remote control, the lights will blink twice and the

door will unlock. The LED will stop blinking.

3. ROLLING UP WINDOWS (COMFORT FUNCTION):

After pressing the lock button on the remote control, a 25-second pulse for rolling up

windows will appear at the "comfort" output.

4. FINDING YOUR CAR IN A PARKING LOT

When the car is locked, press the lock button on the remote control once. The lights

will start blinking for 30 seconds to help you find your car. Pressing the same button

once again stops this function.

5. ADDITIONAL CHANNEL (OPENING THE CAR BOOT)

Press and hold the unlock button for 2 seconds. A pulse for controlling the car boot

will appear at the output of the additional channel.

6. SETTING THE ELECTRIC/PNEUMATIC LOCK

(using a jumper)

J3: set in position 2. 0.5-second pulses for an electric lock.

J3: set in position 1. 3.5-second pulses for a pneumatic lock.

7. PAIRING REMOTE CONTROLS

You can pair up to 6 remote controls with the controller.

Press once the switch located on the control unit central board, accessible from the side

opening of the housing. The hazard warning lights will switch on. Next, press one of the

buttons on the remote control you want to pair and the hazard warning lights will switch

off. The pairing procedure is now finished. To pair another remote control device,

repeat the procedure.

8. UNPAIRING REMOTE CONTROLS

Press and hold for 3 seconds the switch located on the control unit central board, ,

accessible from the side opening of the housing. The hazard warning lights will blink 5

times. All remote controls are now unpaired.