dogPacer minipacer Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Produtos para animais de estimação dogPacer minipacer. dogPacer minipacer 18 páginas.
Também para dogPacer minipacer: Manual de início rápido (6 páginas)
Imprimir página
3. ASSEMBLY INSTRUCTIONS
3.1
Initial Assembly
Take the MiniPACER out of the box and place it on cardboard, a mattress, or a carpeted surface.
• Lay the MiniPACER in an open area so you have plenty of room to work.
• Open legs and lock them into place using the Leg Pins (Bolt Ø6). Make sure they are locked (see
diagram below). You only need to use 2 of the Leg Pins – the additional 2 are used for the incline
feature.
• Put the overhead bar in place and tighten the 4 screws (M6*15). The upper part can come off if your
dog is too big. NOTE: Tighten screws a little at a time using the 5mm Hex Key, one by one.
Ø6 Flat Washer / M6*15
Motor cover
Plain washer Φ 6
Ø6 Flat Washer / M6*15
Motor cover
Motor cover
Ø6 Flat Washer / M6*15
Hex bolt M6*10
Motor cover
Motor cover
Plain washer Φ 6
Ø6 Flat Washer / M6*15
Motor cover
Motor cover
Ø6 Flat Washer / M6*15
6