Dogtra Edge Manual do Proprietário - Página 12

Procurar online ou descarregar pdf Manual do Proprietário para Produtos para animais de estimação Dogtra Edge. Dogtra Edge 20 páginas. Remote controlled dog training collars
Também para Dogtra Edge: Manual do Proprietário (19 páginas), Manual do produto (14 páginas), Manual do Proprietário (19 páginas), Manual de definição do código (2 páginas)

9. What the LCD icons mean

The icons on the LCD screen on the transmitter are listed

below.

Nick

Constant

Pager

Light

Rheostat/volume intensity control

Selector/step intensity control

Battery life indicator

The EDGE receiver/collar location light can be set to any

of the 4colors offered.

To change the receiver/collar location light to white, red,

green, or blue, follow the instructions below,

1. Start with the receiver/collar turned off.

2. Hold down the on/off button on the receiver/collar for

10 seconds.

Attention

The on/off button must be pressed for a full

10 seconds.

3. Release the on/off button after the white location light

flashes rapidly. The white location light will start flashing

after the single green(small) LED indicator code setting

light finishes blinking.

4. Press the on/off button once to set the desired color.

* The location light colors will rotate in the order of white,

red, green, and blue for two full rotations.

* The location light color will reset to the corresponding

color when re-coded to another button.

To set the coding for the Dogtra EDGE transmitter to an

existing receiver/collar, or an Additional receiver/collar,

follow the steps below.

1. Start by turning on the

transmitter by holding

down the on/off button

on the back of the

transmitter.

2. Set the transmitter's

intensity dial to "0",

and the mode selection

dial to "C".