Cylon CBT-STAT Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Sistemas de controlo Cylon CBT-STAT. Cylon CBT-STAT 20 páginas.

How to adjust the Temperature Setpoint

If the Controller's Strategy has been configured to permit it, the user can adjust the Temperature setpoint or occupancy status.

•

Press any button so that the temperature setpoint is displayed on the second line, with a flashing unit symbol.

•

Press the up button

until the desired temperature setpoint is displayed.

•

The right button

Occupancy Override must be enabled in the controller configuration.

Operation Mode

At the bottom of the display there is a line of icons

CBT12iVAV or CBT14 Unitary Controller's Strategy:

MAN0120US rev 16

or down button

to adjust the setpoint value by the span defined in the Controller's configuration,

can also be used to request the Strategy to override the schedule and force occupancy mode. Permit

Indicates that the controller is operating in 'heating'

mode.

Indicates that the controller is operating in 'cooling'

mode.

Indicates that the controller strategy is currently

operating in 'occupancy' mode.

Indicates that functions of the Controller Strategy

are in manual override mode.

Indicates that an alarm state is detected in the

controller strategy.

Indicates that the fan is operating.

Indicates that the keypad

Engineering mode.

that give information about the current operation of the

is operating in