Dogtra ARC Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios para automóveis Dogtra ARC. Dogtra ARC 16 páginas. Handsfree kit
Também para Dogtra ARC: Manual do produto (14 páginas), Manual (12 páginas)

Imprimir página

1. Attach the charging cables to both the transmitter and

receiver(s), as shown on page 16.

2. Plug the charger into a 120-volt wall outlet or if using

only for Lithium-Polymer batteries (Use a 230-volt

European charger for Europe.). When properly plugged

in, all indicator lights should glow red. During the

cable is unplugged from the unit after a full charge, you

will need to turn the unit on again before use.

3. The Lithium-Polymer battery is fully charged within

2-hour. The lights will stay red during the charging

process. The red light will change into a steady green light

when the battery is fully charged (When you disconnect

restart the unit).

4. After charging, cover the battery charging receptacles

collar.

NOTE :

accessories for your Dogtra e-collars. When a charger is not

in use, disconnect it from the power source.

8. How to change the stimulation intensity

The Dogtra ARC has a rheostat intensity dial on the top

of the transmitter (0 is the lowest and 127 is the highest).

or downward) depending on your dog's temperament

and threshold for stimulation. Also, as the dog's attitude

changes, especially during times of increased excitement or

NOTE :

while the stimulation is in use.

9. The handheld transmitter LCD

The LCD screen indicates the stimulation level (0-127).

The LCD battery life indicator shows 3 bars at full charge,

2 bars at medium charge and 1 bar when it needs to be

charge for your receiver, observe the LED indicator on the

Green = full charge

Amber = medium charge

Red = needs charge

Care for LCD Transmitters in Cold Temperature

In cold temperatures (10 degrees F or below), the Liquid

Crystal Display (LCD) on your transmitter may be dim

or slow to respond. Wait until the display becomes visible

before selecting any training level.

Even though the LCD screen might be dim or slow to

transmitter will still function properly. In the occurrence

of extremely cold weather, the LCD screen might take a

moment to respond causing the intensity level to freeze at