Aseptico ADC-02CF Manual de configuração - Página 2
Procurar online ou descarregar pdf Manual de configuração para Mobiliário de interior Aseptico ADC-02CF. Aseptico ADC-02CF 2 páginas. Portable hydraulic dental chair
Também para Aseptico ADC-02CF: Manual de operação/manutenção e conjunto de esquemas (16 páginas)
Imprimir página
4.
Adjust the leveling foot
to compensate for an uneven floor.
A
5.
Rotate the selector lever
SEAT LIFT position as shown on the
label
B
on the chair base.
B
A
Pump the lift lever
C
to raise the chair
to the desired height.
C
Press and hold down the selector
lever
D
in the SEAT LOWER position to
lower the chair.
D
6.
Lift the backrest
A
B
guiding the clevis pin
the backrest cylinder, into the latch
on the backrest frame, until they have
D
securely latched
.
A
A
as needed
A
to the
7.
Rotate the selector lever
BACKREST LIFT position as shown on
the label
Pump the lift lever
backrest to the desired height.
upright while
Press and hold down the selector lever
on the end of
D
C
to lower the backrest; if the seat is
unoccupied, it may be necessary to
push down on the backrest to help it
recline.
B
D
A
B
on the chair base.
B
A
C
to raise the
C
Never attempt to raise the
backrest by lifting up on the
backrest, as this may pull air
into the hydraulic system!
Always use the lift pump lever
to raise the backrest.
in the BACKREST LOWER position
D
8.
Unfold the leg
C
the chair.
9.
Fold out the hand grips
posts and insert them into the ends of
the arm slings
to the
B
10. Adjust the height of the pillow
needed.
Refer to the Operation and
Maintenance
complete instructions.
P.O. Box 1548 • Woodinville, WA 98072-1548
(800) 426-5913 • (425) 487-3157
www.aseptico.com • [email protected]
P/N: 421061 • Rev. C • ECO 13890 • 8/2016
A
B
and foot
panels of
A
B
A
on the arm
B
.
A
A
B
A
as
A
Manual
for
Printed in USA