Aseptiscope WMS-01 Manual de instruções de utilização - Página 11

Procurar online ou descarregar pdf Manual de instruções de utilização para Equipamento médico Aseptiscope WMS-01. Aseptiscope WMS-01 16 páginas.

Troubleshooting

Disk cover did not adhere to

diaphragm

Disk is not fully exposed in

application window

Activation sensor is not

activating dispenser

Be sure to hold the back of the stethoscope

diaphragm (do not hold by the tubing) and

firmly place the stethoscope diaphragm into the

application window. Be sure stethoscope tubing

fits within the notch. Do not use excessive

force. If application is still unsuccessful,

manually remove by pulling disk cover from

application window and discard. Wave below

the activation sensor to position new disk cover

in application window and reattempt.

TIP: Not all stethoscopes are made equal!

Lifting an edge of the stethoscope first may

improve disk cover adherence.

•

If light ring is red, Clean Cassette is

jammed. Try removing any visible disk

covers and wave below the activation

sensor after 3 seconds. If dispenser does

not activate/advance disk cover, check for

and remedy any indicator lights.

•

If light ring is not red and dispenser is

operational, Clean Cassette is not jammed.

A partially exposed disk cover may be

visible, but should not alter performance.

NOTE: The dispenser will automatically pause

3 seconds between each activation.

Ensure a Clean Cassette is installed.

Check the batteries and Clean Cassette

indicator lights.

Ensure nothing is blocking the activation sensor.

Ensure nothing is covering the safety sensor.

Replace batteries, as necessary.