ASG ASG-D17 Manual de operação - Página 6
Procurar online ou descarregar pdf Manual de operação para Chave de fendas eléctrica ASG ASG-D17. ASG ASG-D17 10 páginas. Mini digital torque wrenches and screwdrivers
Imprimir páginaASG Mini Digital Torque Wrenches and Screwdrivers
Operation Manual
Setting Memory Preset
Pressing M will cycle though the 9 memory presets in order M1 through M9.
Note: The 9 memory positions can be set to a different torque unit and each can be set
to peak or track modes independently of each other.
Operating in Peak Mode
When the tool is operated in peak mode the torque reading on the display will indicate
the highest reading achieved and it will remain on the display until torque is once again
applied or the "C" button is pressed Once torque is again applied the reading will be
replaced by the new reading. Torque readings may be stored in memory when in Peak
Mode - see right column.
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
44110-3898
| Phone: (
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com | Revision: 11/14/2019 | Page 6 of 10
888) 486-6163
216) 481-4519
Operating in Peak Mode (Cont.)
*Seen on Wrench only, the Record Number shows the number of the reading being stored.
**The memory holds 250 readings. If [Full] is seen, no more readings can be stored until
the memory is either cleared or downloaded. See page 7 to manage the wrench memory or
page 8 to manage the screwdriver memory.