Doka 588675000 Instruções de funcionamento originais - Página 14
Procurar online ou descarregar pdf Instruções de funcionamento originais para Equipamento de construção Doka 588675000. Doka 588675000 18 páginas.
Imprimir páginaHydraulic unit Xclimb 60 V45 50/60Hz
B
C
D
9
2873
-20 -
0 02
A 'Lift' and 'Lower' hand lever
B 4 pressure-side connections (Lift) Flatface BG2 sleeve (blue)
C 4 pressure-side connections (Lower) Flatface BG2 sleeve (yel-
low)
D Accessories cover
NOTICE
System pressure controller Xclimb 60 V45
must be installed for the stripping cylinder to
be operated with the Hydraulic unit Xclimb 60
V45 50/60Hz.
Required system pressure: 200 bar
Follow the directions in the 'Hydraulic unit
Xclimb 60 V45 50/60Hz' Operating Instruc-
tions!
➤
Route the Pair of hydraulic hoses from the stripping
cylinder to the Hydraulic unit Xclimb 60 V45 50/60Hz
and connect the hoses.
14
C
Original Operating Instructions Framax stripping corner I hydraulic
NOTICE
Invariably, only one stripping cylinder can be
connected to and operated with the Hydraulic
unit Xclimb 60 V45 50/60Hz!
Exception:
▪
No-one in the danger zone!
▪
Formwork erecting and stripping operations
are under observation at all times!
Note:
The couplings on the Hydraulic unit Xclimb 60 V45
50/60Hz and the couplings on the pair of hydraulic
hoses for stripping cylinder are colour-coded.
B
A
D
A Hydraulic unit Xclimb 60 V45 50/60Hz
B Framax stripping cylinder I
C Pair of hydraulic hoses
(pre-mounted on Framax stripping cylinder I)
D Pair of hydraulic hoses f. stripp. cyl. 5.00m (optional)
NOTICE
After each formwork erecting or stripping oper-
ation, the pair of hydraulic hoses of the strip-
ping cylinder have to be disconnected from the
hydraulic unit.
C
999239002 - 07/2018