Doka Eco 15 350 Informações do utilizador - Página 6
Procurar online ou descarregar pdf Informações do utilizador para Equipamento de construção Doka Eco 15 350. Doka Eco 15 350 13 páginas. Floor props
Imprimir páginaInstructions for assembly and use (Method statement)
Setting up with tripod
Applies only for use as free-standing props. Comply
with the instructions in the applicable User Information
booklet when using the props in combination with a
formwork system.
➤
Roughly adjust the height of the floor prop, using the
fastening clamp.
9720-006
➤
Set up each removable folding tripod.
➤
Put the floor prop into the tripod and fix it in place with
the clamping lever.
Before stepping onto the formwork, check again to
make sure that the props have been correctly fixed
in the tripods.
9720-000
6
User Information Floor props Eco 15
➤
With the prop upright, use the adjusting nut for preci-
sion adjustment.
9720-006
The fastening clamp has to be pushed all the
way into the floor prop.
98017-202-01
Setting up without tripod
➤
To prevent toppling, use retaining head DF15 to
secure intermediate props for floor formwork (see
user information document for Dokaflex 15).
➤
When using props as temporary reshoring, press
them sufficiently tightly to the underside of the floor
slab so that they cannot topple.
Backing off floor props under load
1)
Use a hammer to back off the adjusting nut.
2)
Hold the inner tube with one hand.
3)
Open the fastening clamp to unfix the inner tube.
Guide this by hand while lowering it into the outer
tube.
2
999807702 - 07/2017
3
1
9720-006