CYP CPLUS-V4H2HA Manual de operação - Página 9

Procurar online ou descarregar pdf Manual de operação para Comutador de matriz CYP CPLUS-V4H2HA. CYP CPLUS-V4H2HA 18 páginas. Uhd+ 4×2 hdmi matrix with audio output

Imprimir página

EDID Dipswitch Block: Each dipswitch toggles the EDID source for

the associated HDMI input between external EDID (DOWN), and

internal EDID (UP).

Note: The external EDID defaults to Output A's EDID. The internal

EDID supports 1080p60 with LPCM 2.0 audio for maximum

compatibility.

SERVICE Port: This port is reserved for ﬁrmware update use only.

6.2 Rear Panel

HDMI IN

HDMI IN 1~4 Ports: Connect to HDMI source equipment such as

media players, game consoles, or set-top boxes. DVI sources are

supported with the use of an HDMI to DVI adapter.

HDMI OUT A~B Ports: Connect to HDMI TVs, monitors, or ampliﬁers

for digital video and audio output.

AUDIO OUT Port: Connect to powered speakers, headphones, or

an ampliﬁer for analog stereo audio output.

RS-232 A 3-pin Terminal Block: Connect directly to a PC, laptop,

or other serial control device with a 3-pin adapter cable to send

RS-232 commands to control the unit. Alternatively, connect to an

RS-232 controllable display connected to output A to send power

on/o ﬀcommands to it when the DISP. button is pressed.

RS-232 B 3-pin Terminal Block: Connect to an RS-232 controllable

display connected to output B to send power on/o ﬀcommands to

it when the DISP. button is pressed.

DC 5V Port: Plug the 5V DC power adapter into this port and

connect it to an AC wall outlet for power.

HDMI IN

HDMI OUT

AUDIO

OUT

DC 5V

RS-232