CYP OR-HD88S Manual de operação - Página 8

Procurar online ou descarregar pdf Manual de operação para Comutador de matriz CYP OR-HD88S. CYP OR-HD88S 20 páginas. 8 x 8 hdmi matrix
Também para CYP OR-HD88S: Manual de operação (16 páginas)

Imprimir página

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

8 x 8 HDMI Matrix

LCM: Displays the setting information of each input and output

setting.

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate green when locked.

IR: IR Receiver window (accepts the remote control signal of this

device only).

MENU: Press this button to access the LCM menu system, from here

EDID settings can be managed and IP system settings are displayed.

Note: For the 'TV' EDID setting, the unit will read and store the EDID

information of the display connected to HDMI output A. For the 'STD'

EDID setting the unit's built-in EDID setting will be used (1080p@60/12-bit

for video and LPCM 2CH for audio).

1~8/A~H and OUT/IN: Press the OUT or IN button to select the output

or input mode and then press the required number button to make

the selection accordingly.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2 then the following sequence of button

presses need to be performed:

Press: OUT  A  B  C  D  IN  1  MENU,

and then press: OUT  E  F  G  H  IN  2  MENU.

Note: If the MENU button is not pressed the selection will not be changed.

POWER

LOCK

OUT