Ashby Solutions VENTILATOR Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Pedal de música Ashby Solutions VENTILATOR. Ashby Solutions VENTILATOR 2 páginas.

Imprimir página
S
V
TANDARD
ENTILATOR
S
M
V
TEREO
OD
ENTILATOR
R
F
EMOTE
OOTSWITCH
Ventilator Quick Start Guide
(
WITH OR WITHOUT THE
  
This
is
Ventilator connects in
a
typical
setup, with a mono
sound source, and a
mono
system.
(
WITH OR WITHOUT THE
  
The
Ventilator can still be
used in a full mono
setup. Note that the
output jack is plugged
into the Out L jack.
This is how the Stereo
Mod
connected in a full
stereo setup, using a
Y cable for separate
left+right inputs.
stereo
maintained in Bypass.
P
:
EDAL
Whether the Ventilator is used in mono or stereo, a remote footswitch can be added.
To control the rotating speed. This switch works in parallel with the Ventilator's
onboard Speed switch. If either of the switches is set to Tremolo (fast) speed, the
Ventilator will switch to Fast. If both of the switches are set to Chorale (slow) speed,
the Ventilator will switch to Slow.
The remote switch can also select Stop or Off. This simulates a Leslie whose motors
have been turned off. In this mode, the amplifier simulation in the Ventilator is still
active. Thus, the result is different than when pressing Bypass.
The Ventilator is compatible with foot and 'halfmoon' switches from NEO Instruments,
Ashby Solutions, Clavia (Nord), and Hammond-Suzuki. See the Ventilator owner's
manual for more details. It is not compatible with most sustain, tremolo-reverb,
channel-boost, or other switches used with other musical gear.
Note that the footswitch cable has a TRS plug.
ST B
M
):
ARKER
OD
how
the
all-mono
amplification
ST B
M
ARKER
OD
Stereo
Mod
  
Ventilator
is
Full
will
be
):
  
This is how the
Vent is connected
in a stereo system.
The input is still
mono, so the Vent
will not produce a
stereo effect when
in Bypass; instead,
both
sides
will
receive the same
mono signal.
Page 2 of 2