dol sensors 114 Manual técnico do utilizador - Página 3

Procurar online ou descarregar pdf Manual técnico do utilizador para Acessórios dol sensors 114. dol sensors 114 4 páginas. 4-20 ma humidity and temperature sensor
Também para dol sensors 114: Manual técnico do utilizador (8 páginas)

Imprimir página

LED/LIGHT PROTOCOL

LED

Green

Red

Flash

4 Maintenance

Clean the sensor with water and a brush without using:

• High-pressure cleaner

• Highly compressed air

• Solvents

• Corrosive/caustic agents

• Alcohol-based disinfectants

During cleaning and disinfection, the sensor should be removed and the sealing plug for the ca-

ble should be mounted. Alternatively, the sensor protective cap can be mounted. The sensor

must be placed with the tip pointing upwards during disinfection.

After the sensor has been exposed to water and condensation, it requires a period where the relative humidity

is lower than 80 %RH in order for it to measure correctly.

Do not bend the sensor as this would inflict permanent damage on the electronics of the sensor.

5 Technical data

Specifications

Measurement range

Accuracy

Output signal

Time constant T

Electrical

Supply voltage

Current

Load

Recommended load

DOL 114 4-20 mA

Status

Operation OK

Outside normal range

(below 10 % RH or exceeding 95 %

RH)

Connection error

Load error, see load graph

Sensor defect

Over or under voltage alarm

Overload

± 2 % RH (40–85 %) ± 3 % RH

V DC

kΩ

Ω

Humidity measurement

0 - 100% RH

(10-95 %) at 0-40 °C

0.16 mA/% RH

20 s at 0.5 m/s air speed

490 – 1 at 24 V DC supply voltage

www.dol-sensors.com

Functional graph

Temperature measurement

- 40 °C – 60 °C

± 0.5 °C (10 – 40 °C)

± 1.5 °C (- 30 °C – 60 °C)

0.16 mA/°C; 0°C at 10.4 mA

6 min. at 0.5 m/s air speed

Common

11 - 30

500

Technical User Guide