Acquaer UTP017-1 Manual do Proprietário - Página 5

Procurar online ou descarregar pdf Manual do Proprietário para Bomba de água Acquaer UTP017-1. Acquaer UTP017-1 15 páginas. Submersible sump pump
Também para Acquaer UTP017-1: Manual do Proprietário (9 páginas)

Imprimir página

If you would prefer to use a larger hose in order to pump

water away more quickly, attach the included adaptor (B)

to pump (A), and then securely attach the Hose Kit

(not included) to the adaptor (B).

WARNING: Secure the discharge hose before plugging

in the pump. Pump torque may cause an unsecured

discharge hose to "whip", possibly causing personal

injury and/or property damage.

NOTICE: Make certain you unwind the garden hose completely. Kinks in the hose will

restrict the pump, preventing it from priming, which is the first step to pumping water.

The water level must be at 1 in. for the pump to prime and operate.

Plug the pump (A) into a 115 volt GFCI power outlet.

WARNING: Do not let plug fall in water and do not stand

in water while the pump (A) is plugged in.

The pump (A) will start operating when the power cord is

plugged into the outlet.

Once the pump (A) has removed the water down to 1/4 in.,

unplug the pump. CAUTION: Failure to unplug it will result

in the pump going into thermal overload.

CAUTION: Do not run the pump (A) dry. Operating the pump

(A) without water will cause damage to seals and will cause

the pump (A) to fail, thereby voiding the pump's warranty.

Remove the pump (A) and hose from the location when finished pumping, as the hose still has

water that can drain back through the pump. Remove remaining water with squeegee, mop,

sponge, towel, wet/dry vac, etc.

INSTALLATION INSTRUCTIONS

OPERATION INSTRUCTIONS