CYP PUV-1610TX Manual de operação - Página 8
Procurar online ou descarregar pdf Manual de operação para Transmissor CYP PUV-1610TX. CYP PUV-1610TX 16 páginas. Hdmi over hdbaset transmitter (pd) and receiver (pse)
Imprimir página
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter's Front and Rear Panels
RS-232 IN
STD UPDATE
1
2
1
STD/UPDATE: This switch is reserved for factory use only.
RS-232 IN: Connect to a PC, laptop or other serial control device
2
for the extension of RS-232 signals.
3
LAN: Connect to an Ethernet device or to your local network as
appropriate.
POWER LED: This LED will illuminate to indicate the unit is on and
4
receiving power via PoH.
5
LINK LED: This LED will illuminate solid when both Transmitter and
Receiver are connected and communicating with each other
properly.
IR2 BLASTER: Connect to the supplied IR Blaster cable for IR signal
6
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
IR1 EXTENDER: Connect to the supplied IR Extender cable for IR
7
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
8
CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with
a single Cat.5e/6/7 cable for transmission of all data signals.
HDMI IN: Connect to HDMI source equipment such as a media
9
player, game console or set-top box. DVI sources are supported
with the use of an HDMI to DVI adapter.
3
POWER
LAN
LINK
3
4
5
IR2
BLASTER
IR1
EXTENDER
6
7
8
HDMI IN
9