Dolby Laboratories CP650 Ficha de especificações - Página 3

Procurar online ou descarregar pdf Ficha de especificações para Leitor de DVD Dolby Laboratories CP650. Dolby Laboratories CP650 4 páginas. Digital cinema processor
Também para Dolby Laboratories CP650: Ficha de especificações (2 páginas), Manual do utilizador (3 páginas)

Imprimir página

CP650 Rear Panel

Automation Connector

25-pin female D-connector for controlling and

indicating format, fader select, projector

status, and mute

Remote Unit/Fader Input

Terminal strip connector for

Dolby Cat. No. 779 remote control unit,

Dolby Cat. No. 771 remote fader, external

auditorium faders (100 kΩ linear

potentiometer)

Hearing Impaired Output

RCA-type female phono connector

Center-weighted sum of L, C, R

Output level: 200 mV fixed

Digital Reader Inputs*

25-pin female D-connectors for two

Dolby Digital readers

Main Audio Output

25-pin male D-connector, balanced or floating

Maximum level, balanced loads:

+26 dBu (15.5 V)

Loudspeaker Equalization

L, C, R, Ls, Rs, Bsl, Bsr: digital 27-band,

1/3-octave

Le, Re (with optional Cat. No. 791):

digital 27-band, 1/3-octave

SW: Digital parametric

Distortion

Typically 0.005% in Dolby SR mode (output

–10 dBu, input 10 dB over Dolby level)

Dynamic Range

Typically 105 dB with fader set to 7

Power Requirements

100–120 and 200–240 VAC, 50–60 Hz,

100 W maximum (including built-in bypass

power supply where applicable)

Dimensions and Weight

3-U rackmount chassis; faceplate:

133

483 mm (5.25

19 inches)

Maximum projection behind equipment rack

rail: 365 mm (14.4 inches)

Maximum level, unbalanced loads:

+20 dBu (7.75 V)

Dolby level output adjust range:

–31 to –12 dBu (20–780 mV)

Option Card I/O

25-pin female D-connector for digital

bitstream input and surrounds output when

equipped with the Cat. No. 790 option card

L, C, R mid and high crossover outputs with

Cat. No. 791 option card

Nonsync Inputs

RCA-type female phono connectors for two

stereo nonsync sources

Input impedance: 21 kΩ

Sensitivity: 0.2–4 V (NS 1), 0.06–1.5 V (NS 2)

Six-Channel Audio Input

25-pin female D-connector for external

six-channel analogue source

Input impedance: 10 kΩ (L, R), 27 kΩ

(C, Ls, Rs, SW)

Operating level: 300 mV

Maximum projection in front of mounting

plate: 38 mm (1.5 inches)

Net: 10.4 kg (23 lb)

Environmental Conditions

Operating: 0°C–40°C (32°F–104°F),

forced-air cooling, 20%–80% relative

humidity (noncondensing)

Regulatory Notices

North America: This unit complies with the

limits for a Class A digital device, pursuant to

Part 15 of the FCC rules, and Industry Canada

ICES-003 specifications. It is UL Listed for the

US and Canada.

Europe: This unit complies with the

requirements of Low Voltage Directive

3/23/EEC and EMC Directive 89/336/EEC

and carries the CE marking accordingly.

Warranty

One-year limited, parts and labour;

see disclaimer.

RS-232C Serial Data Input Port

9-pin female D-connector to connect external

PC for setup and automation control

Ethernet Connector

RJ-45 female for automation control and

subtitling timing data

Motor Start*

9-pin female D-connector for Dolby Digital

reader motor start timing and projector

changeover

Microphone Input

XLR female connector, balanced, for

Auditorium Assist, PA, or B-chain alignment

mic (or multiplexer)

Phantom power available (+15 V)

Optical Inputs*

9-pin female D-connectors, balanced, for two

stereo solar cells or analogue LED readers

Power available for external cell preamp

circuits (±14 V/40 mA)

*Not included on CP650DC

Disclaimer of Warranties

Equipment manufactured by Dolby Laboratories is warranted

against defects in materials and workmanship for a period of

one year from the date of purchase. There are no other

express or implied warranties and no warranty of

merchantability or fitness for a particular purpose, or of

noninfringement of third-party rights (including, but not

limited to, copyright and patent rights).

Limitation of Liability

It is understood and agreed that Dolby Laboratories' liability,

whether in contract, in tort, under any warranty, in

negligence, or otherwise, shall not exceed the cost of repair

or replacement of the defective components or accused

infringing devices, and under no circumstances shall Dolby

Laboratories be liable for incidental, special, direct, indirect,

or consequential damages, (including, but not limited to,

damage to software or recorded audio or visual material), cost

of defense, or loss of use, revenue, or profit, even if Dolby

Laboratories or its agents have been advised, orally or in

writing, of the possibility of such damages.