CYP CH-1602RX Manual de operação - Página 10
Procurar online ou descarregar pdf Manual de operação para Extensor CYP CH-1602RX. CYP CH-1602RX 15 páginas. Hdmi over hdbaset transmitter and receiver with optical audio return (oar)
Também para CYP CH-1602RX: Manual de operação (16 páginas)
Imprimir página
6.4 Receiver Left and Right Panels
Left
CAT5e/6/7 IN
1
CAT5e/6/7 IN: Connect to the Transmitter unit with a single
1
CAT5e/6/7 cable for transmission of all data signals. The yellow LED
will illuminate to represent the link from Receiver is steady, when
it blink irregularly it represent the link error or when not illuminate
it means no link with Receiver. The green LED will illuminate to
represent the PoE function active.
LAN: Connect to a PC or Laptop to the internet or network
2
connection. The yellow LED will illuminate to represent the link with
Transmitter is steady, when it blink irregularly it represent the link
error or when not illuminate it means no link with Receiver. The
green LED will illuminate to represent the Ethernet speed is with
100Mbit/s.
3
OPT. IN: Connect to audio source equipment such as DVD or Blu-
ray player for audio signal sending to Transmitter's OPTICAL OUT.
4
ARC IN or OPT. IN SWITCH: Switch this switch to select ARC channel.
Switch to ARC in to use HDMI OUT's audio or switch to Optical IN to
use Optical 1's audio.
Note: Depending on the connected devices of the HDMI OUT &
Optical in, the ARC input/output transmission distance may be
varied. It is suggested to use cable within 2 meters long to ensure
the best audio quality.
5
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
Right
OPT.
OPT.
ARC
LAN
IN
IN
IN
HDMI OUT
2
3
4
5
6