ASHE STL-96 Manual de operação - Página 7
Procurar online ou descarregar pdf Manual de operação para Equipamento de gravação ASHE STL-96. ASHE STL-96 17 páginas. Stream selector six channel
This shows thatthe microcontrollerhas initialized properly.
The power ON screen shows the manufacturer's name, the product name and the model number.
PROCESS SCREEN
After the Power ON screen, the instrument will go to Process Screen as follows:
The first line of the display shows which Stream Number is active and also the process status.
The second line of the display shows the time in seconds for which the selected Stream is active. This is
not active in Manual Mode.
The third line of the display shows process variable with respect to input signal to the instrument.
The fourth line of the display shows the mode of operation selected.
PARAMETER SETTING MODE SCREEN
Press MODE key to enter into Parameter Setting mode.
After pressing MODE key the display will show the following screen –
Enter the number for themode selected (01 to 06) using the INC key and press MODE key again to
confirm the selected parameter setting mode.
If there is no key process for 10 seconds, then the display will time-out and return to the process
screen.
INPUT CALIBRATION MODE
The ASHE Stream Selector Model STL-96 is factory calibrated. As such, the instrument doesnot require
any recalibration at the customer's side. So do not enter into Input Calibration Mode unless the
instrument requires recalibration.
Before entering into Input Calibration Mode, ensure that an accurate analog signal of 4 to 20mA DC is
connected to the instrument at the input terminals with correct polarity.
Enter the number 01 into Select Menu by using INC key in the PARAMETER SETTING MODE
SCREEN.PressMODE key to enter into Input Calibration Mode.
The OLED Display indicates as under :
STREAM :
01
TIME
:
0001
INPUT
:
0500
MODE
:
Timer - Auto
1) I/P CAL
2) I/P RANGE
3) SKIP
4) ALARMS
5) ReTrans
6) SETTINGS
Select Menu
: 00
Password
0000
RUN
ppm
ASHE CONTROLS PRIVATE LIMITED.
S
S
STL-96
TREAM
ELECTOR
Operation Manual