Ashford DOUBLE TREADLE KIT Instruções - Página 2
Procurar online ou descarregar pdf Instruções para Ferramentas de tecelagem & amp; Acessórios Ashford DOUBLE TREADLE KIT. Ashford DOUBLE TREADLE KIT 2 páginas. Traveller single or double drive
Também para Ashford DOUBLE TREADLE KIT: Instruções (2 páginas), Manual de instruções (6 páginas), Instruções (2 páginas)
Imprimir página8. Loosen the bolts or screws holding the single leg to the frame.
Use either the allen key provided or a slot screwdriver. Remove
the old treadle rail.
9. Rub candle wax onto the steel pins projecting from the new
treadle rail.
10. Place the Double Treadle Assembly into position between the
two legs.
11. Push the single leg against the treadle rail. Retighten the bolts or
screws.
12. Slide the inner shell of the conrod
universal joint onto the crank until it
clicks into the groove. Then click the
rear conrod onto the universal joint on
the crank.
14. Lubricate all moving parts with Ashford Spinning Wheel Oil. Now you can enjoy spinning on your new Ashford Double
Treadle Kit.
Front
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: [email protected] Internet: www.ashford.co.nz
13. Insert the front conrod into the large slot in right hand treadle board. Hold
the conrod joint with one hand on either side of the treadle board. With both
hands, turn the conrod joint a ¼ turn. Stretch and slide it into the small slot
and turn it back a ¼ turn until it clicks into place.Repeat the sequence for the
rear conrod and the left treadle board.
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
Rear
DTKTD14032014V3