CYP CHDBT-1H2CE Manual de operação - Página 7
Procurar online ou descarregar pdf Manual de operação para Cabos e conectores CYP CHDBT-1H2CE. CYP CHDBT-1H2CE 16 páginas. 1×3 hdmi over hdmi and cat5e/6/7 splitter with poe and lan serving
Também para CYP CHDBT-1H2CE: Manual de operação (16 páginas)
Imprimir página
4. SYSTEM REQUIREMENTS
• HDMI equipped source device, connected with an HDMI cable or
DVI equipped source, connected with DVI to HDMI cables
• HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connected with HDMI cables
• Industry standard CAT5e/6/7 cables
• HDBaseT™ Receivers (i.e. CH-506RX, CH-507RX or CH-1109RX)
5. FEATURES
• HDMI with 4K×2K resolution and 3D support, HDCP and DVI
compliant
• Simultaneous output of the same source through HDMI and
CAT5e/5/7 outputs
• Supports Deep Color up to 1080p/36-bit
• Supports wide range of PC resolutions from VGA to WUXGA (RB)
and HDTV resolutions up to 4K × 2K
• Supports transmission of High Definition audio: LPCM 7.1CH, Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio (32 kHz~192 kHz
sample rate)
• Supports distances up to 100 meters over CAT5e/6/7 cables
• HDBaseT™ 5PlayT™ convergence: uncompressed high definition
Video and Audio, LAN serving, Power over Ethernet and RS-232/IR
control
• 3D signal display is dependent on the TV/Display's EDID settings
Note:
1.
This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specification.
2.
The PoE function is designed for powering compatible Receiver
units only, non-PoE Receivers will need their own power supply.
Receivers of another brand may not be compatible.
3.
For playback of 4k×2k HDMI source signals, a 4K×2K capable
display and High Speed HDMI cables are required.
2