Ashford e-Spinner 3 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Rodas giratórias Ashford e-Spinner 3. Ashford e-Spinner 3 6 páginas.
Também para Ashford e-Spinner 3: Manual de montagem (6 páginas)
Imprimir página
5. Apply a drop of oil to the flyer spindle and slide a
bobbin on.
6. Apply a drop of oil to the end of the flyer shaft and
feed it into the flexible motor drive. Note the flat on the
shaft aligns with the raised line on the flexible drive.
Snap the flyer down into the front flyer bearing. Apply a
drop of oil to lubricate this bearing. Don't over oil.
-1
-2
7. Tie one end of the black waxed thread to the
end of the spring, thread through the screw eye
and tension knob and tie a knot.
8. Place the nylon brake
band around the bobbin
whorl, place the tension
knob in the tapered
hole and tighten until
the springs just start to
extend. This is the normal
amount of brake band
tension required. Do not
extend the springs more
than 1½ times their own
length.
9. Locate the threading
hook into the tapered hole
in the front.
3