CYP CPRO-U8T Manual de operação - Página 7
Procurar online ou descarregar pdf Manual de operação para Cabos e conectores CYP CPRO-U8T. CYP CPRO-U8T 16 páginas. 1 by 8 4k uhd hdmi splitter
Também para CYP CPRO-U8T: Manual de operação (12 páginas), Manual de operação (12 páginas)
Imprimir página
5. FEATURES
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 compliant
• 1 HDMI input and 8 HDMI outputs
• Supports HD resolutions up to 4096×2160@60Hz (4:2:0, 8-bit)
• Simultaneous display of a single 4K source on up to eight 4K displays
• 3D signal support (with 3D source and compatible 3D TV)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
Bitstream, and HD Bitstream
• System Reset function (CEC active source command)
• EDID management control including "Standard" (Internal EDID)
mode and "TV" (External Display EDID) modes
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
1
2
1
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
OUT LEDs 1~4: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no
sink is detected the LED will remain off.
3
IN LED: This LED will illuminate to indicate that a live source has
been detected on the input port. When no source is detected the
LED will remain off.
4
OUT LEDs 5~6: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no
sink is detected the LED will remain off.
5
EDID SWITCH: This switch controls the EDID management behavior
of the unit. When set to "TV" mode the unit will read and store
OUT
IN
3
4
5
2
3
OUT
6
7
8
4
EDID
SYS-RST
SERVICE
STD
TV
ON
OFF
5
6
7
2