Cypress CY3203-CapSense Manual de início rápido - Página 16

Procurar online ou descarregar pdf Manual de início rápido para Placa-mãe Cypress CY3203-CapSense. Cypress CY3203-CapSense 20 páginas. Psoc express

Imprimir página
Tune a CapSense Project

Assign Drivers to Pins

4.9.
In the User Pin Assignment window, click Unassign All Pins. All drivers move to the Unassigned Driv-
ers list.
4.10. To assign drivers to pins, drag and drop drivers from the Unassigned Drivers list onto a pin. Assign the
CapSenseProperties_ExternalCap driver to port P0[3].
4.11. Assign the rest of the drivers according to the following table.
CapSenseProperties_ExternalCap
I2CSlave I2CSCLPin
LCD_SHARED_0LCDPin11
Slider_CSA_Slider00
Slider_CSA_Slider01
Slider_CSA_Slider02
Slider_CSA_Slider03
Slider_CSA_Slider04
Slider_CSA_Slider05
Slider_CSA_Slider06
Slider_CSA_Slider07
4.12. Click Next. PSoC Express builds your project (this may take a few minutes).
16
P0[3]
P1[1]
Note: The LCD and I2C each
have more than one driver that
P2[0]
must be assigned. PSoC Express
P0[0]
automatically assigns all the driv-
ers for the LCD and I2C when the
P0[1]
first driver for each is assigned to
P0[2]
a pin.
P2[7]
P0[4]
P0[5]
P0[6]
P0[7]
CY3203A-CapSense Quick Start Guide, Spec. # 001-17826 Rev. *A