Cypress CY3210-PSoCEVAL1 Manual de início rápido
Procurar online ou descarregar pdf Manual de início rápido para Placa-mãe Cypress CY3210-PSoCEVAL1. Cypress CY3210-PSoCEVAL1 2 páginas.
Também para Cypress CY3210-PSoCEVAL1: Manual de início rápido (2 páginas)
Imprimir página
1
Insert the CY3210-PSoCEVAL1 kit DVD into
the DVD drive of your PC.
Install the kit contents, PSoC Designer,
and PSoC Programmer.
3
Plug in the MiniProg to the ISSP header
on the CY3210-PSoCEVAL1 board.
Connect the MiniProg to the PC using
the USB cable provided with the kit.
CY3210-PS
CEVAL1 EVALUATION KIT
O
QUICK START GUIDE
2
Remove the CY3210-PSoCEVAL1 board
from its package.
Place the character LCD provided with the
kit on J9.
Connect jumper (shunt) at JP1 and JP2.
Connect the single strand jumper wire
between P01 and VR.
4
Open PSoC Programmer; click on the
Toggle Power button to power the board.
Vary the potentiometer; the voltage is
measured by an ADC and is displayed in hex
format on the LCD module.