Cloud BT-IAEW Manual de instalação - Página 13

Procurar online ou descarregar pdf Manual de instalação para Unidade de controlo Cloud BT-IAEW. Cloud BT-IAEW 16 páginas. Bt-i series bluetooth wireless audio module

Imprimir página

RF power setting

The RF power level at which the Bluetooth interface operates – and hence the operational range of the BT-1 – is adjustable.
Units are shipped with the power setting at maximum, but in some installation circumstances, it may be desirable to limit the
power of the module, thereby restricting the operational range. Typically, it may be necessary to do this where there are BT-1
modules installed in adjoining rooms, as it reduces the likelihood of the BT-1 in one room appearing in the Device List on
smartphones, tablets, etc., in other rooms.
The power level is set by SW2, SW3 and SW4 on the left-hand DIP switch (as seen from the rear of the module). The three
switches work in a binary manner, thus eight power levels are theoretically available, though this is limited to seven in practice.
The power levels are in 4 dBm steps. The table below lists the available power settings:
NOTES:
1. relative to 0 dBm = 1 mW
2. Level 8 is set at the factory as the default
LEVEL
SW2
SW3
1
OFF
OFF
2
OFF
OFF
3
OFF
ON
4
OFF
ON
5
ON
OFF
6
ON
OFF
7
ON
ON
8
ON
ON
2
SW4
POWER
1
OFF
-18 dBm
ON
-14 dBm
OFF
-10 dBm
ON
-6 dBm
OFF
-2 dBm
ON
+2 dBm
OFF
+6 dBm
ON
BT-1 Installation Guide v1.0
13