Ashly LX-308B Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Misturador de música Ashly LX-308B. Ashly LX-308B 12 páginas. Stereo line/microphone mixer
Também para Ashly LX-308B: Manual de instruções (16 páginas), Notas técnicas e especificações (2 páginas), Manual de instruções (8 páginas)

Imprimir página

Page - 6

Safety Instructions – 3

Introduction - 4

LX-308B Mixer – 5

The LX-308B is 1RU, and weighs 10 pounds.

Connectors & Cables – 5

Physical Description - 6

Front Panel

Rear Panel

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11

LX-308B Front Panel

Channel Level - This is the individual channel

volume control, which feeds a channel to the

main mix.

Channel Pan - This control adjusts the position

of the channel in the stereo mix.

Mic/Line Switch - This switch on the first two

inputs increases the channel input sensitivity by

30 dB to allow the use of low impedance

dynamic microphones.

On/Off (mute) Switch - This switch on each

channel will turn the channel completely off

allowing the channel level to remain at its

desired setting when the input is not needed.

Output Meters - A pair of peak detecting 6-

segment LED meters are used to indicate

output level. Green LED's are used below 0

VU, yellow above 0 VU, and red LED's indicate

clipping. This meter pair monitors the main

stereo output (0 VU = +4dBu). The red clipping

LED's also monitor the summing amplifiers,

making it possible for these indicators to

illuminate even with the stereo output level

turned off.

Operator Manual – LX-308B Mixer

Stereo Output Level - This is the main master

gain, which sets the operating level for the

entire mixer. This control does not effect the

mono output level.

Stereo Output Mute - This switch entirely

mutes the main stereo output. The headphone

and mono output are not affected. This is

particularly useful when the LX-308 is used as

a sub-mixer.

Mono Level - This is the master gain control

for the mono output, which is the combined

signal of the left and right outputs. It has no

effect on the stereo output.

Stereo Headphones Level - This adjusts the

volume level of the front panel headphone jack

10. Power Indicator LED – When illuminated,

indicates that the rear power switch is in the

ON position.