Ashly MX-508 Ficha de especificações
Procurar online ou descarregar pdf Ficha de especificações para Misturador de música Ashly MX-508. Ashly MX-508 2 páginas. 8-channel, mic/line mixer
Também para Ashly MX-508: Notas técnicas e especificações (2 páginas), Manual de instruções (12 páginas), Manual de instruções (12 páginas), Manual de instruções (16 páginas)
Imprimir página
Hand-built in
5-Year Warranty
Webster, NY
MX–508
The MX-508 is an 8-input stereo rackmountable mixer.
Designed for many applications, it has an extensive mix
of features for a small unit combined with excellent sound
and quiet performance.
The MX-508 features 84dB of gain to ensure full output with
low-level or distant microphones. Several years of research
went into the microphone preamp and the result is a discrete
circuit with better than -129 dBu Equivalent Input Noise (EIN)
and very low distortion. Low and High Shelving EQ combined
with mid-band peaking EQ tunable from 140Hz and 8 kHz
make for a very flexible tone control. Phantom power of +48
VDC is provided for condenser microphones via a switch on
the front panel. Each input has its own 20dB pad switch. Vari-
able gain trim and Mic/Line selection switches are also found
on each input channel. Rounding out the list of standard input
features are a Peak Clip indicator, two Aux Sends (factory-set
with one pre-EQ and level and the other post-EQ and level,
these sends may be modified by a qualified technician), in/out
channel patching, level and pan controls, and both balanced
XLR microphone and TRS Line inputs.
Transformer-balanced Left and Right XLR outputs are
standard, as are balanced Left and Right TRS 1/4" outs.
There is also an independent Mono output with its own
front panel level control, as well as a selectable Headphone
output with Level Control.
Ashly Audio, Inc.
|
847 Holt Rd
|
Webster, NY 14580-9103 USA
Unless otherwise stated, specification conditions are: 150 Ohm source, Input set at "-40", all other controls set at nominal, XLR output into 600 Ohm or greater.
©2014 All features, specifications and graphical representations are subject to change without notice. Ashly Audio is a division of Jam Industries, Ltd.
8-C
hannel
M
/l
iC
ine
There are Pre-Master Sub In/Out patch points for linking
other mixers. Peak Clip indicators are also provided
for the Outputs, and the 10-Segment LED Meters may be
selected to monitor either Program Left and Right or Aux 1
and 2. Maximum output level is +24dB into 600 Ohms.
The MX-508 also has two Master Aux Sends and two
panable Master Aux Returns (one stereo and the other
mono). A 3.5mm stereo line in jack on the front panel
offers a convenient input alternative for MP3 players
and smartphones with level control to the Mains or to
Aux 1. Stereo RCA Outputs are also provided.
The MX-508 combines traditional Ashly quality with
internally modular construction in a package offering
outstanding value and reliability.
MX-508 Features:
• 3-Band, channel EQ w/ sweepable mid freq center
• Convenient, 3.5mm stereo line in jack on front panel
for MP3 players and smartphones
• 2 AUX sends per channel
• Insert jacks on each channel
• Independent mono output with level control
• Transformer isolated +24dBm 600 Ohm balanced
XLR-stereo program outputs
• Safety/Compliance:
TUV
c
|
US toll free: +1-800-828-6308
|
tel: +1-585-872-0010
|
|
www.ashly.com
DS-1 1213
Specifications
,
Distortion
M
ixer
THD @ +4dBu Output, 20Hz–20kHz
THD @ +20dBu Output, 30Hz–10kHz
IMD (SMPTE) @ +20dBu Output
Hum and Noise (20Hz–20kHz @ Max Preamp Gain)
Equivalent Input Hum and Noise
Residual Output Noise, TRS (All Levels @ Min)
Residual Output Noise, XLR (All Levels @ Min)
Master Level @ nominal (All Levels @ Min)
Master Level @ nominal (1 Channel Level @ Min)
Aux 1/2 Out, Aux Master @ nominal (All chan Aux @ Min)
Aux 1/2 Out, Aux Master and 1 Chan Aux @ nominal
Frequency Response
20Hz–20kHz
50Hz–10kHz
Equalization
Low (@ 70Hz, shelving)
Mid (peaking, 140Hz–8kHz)
High (@ 8kHz, shelving)
Crosstalk
Adjacent Inputs, (20Hz–20kHz)
Mic Input to Master Output (1kHz)
Mic Input to Master Output (20kHz)
Metering
, CE, FCC, RoHS
us
VU Meters
Peak Indicators
Weights, Dimensions & Power
Dimensions
Unit Weight
Shipping Weight 19lbs (9kg)
Power Req.
Maximum Gain Voltage (±2dB)
Master
Mic Input to Master Output (600 Ohm load)
Line Input to Mono Output (600 Ohm load)
AUX Sends
Mic Input to Aux Master 1 Output (Pre-chan level)
Mic Input to Aux Master 2 Output (Post-chan level)
|
fax: +1-585-872-0739
SUB Input to Master Output
AUX Returns
1 or 2 to Master Output
Stereo Line In to Master Output
Note: 0dBu = 0.775 VRMS
<0.05%
<0.05%
<0.05%
<-128dBu
<-100dBu
<-90dBu
<-80dBu
<-68dBu
<-88dBu
<-68dBu
+0.5/-1.0dB
+0/-0.5dB
±18dB
±13dB
±12dB
<-65dB
<-65dB
<-55dB
(Selectable to L/R or Aux Outputs) -21VU to +6VU,
0VU = +4dBu
Peak Clip indicator on each input channel and
L/R outputs, illuminates 3dB below clipping
19"W x 5.25"H x 9.4"D (483mm x 133mm x 239mm)
14.7lbs (6.68kg)
100–240VAC, 50–60Hz, 30W
84dB
30dB
80dB
95dB
12dB
30dB
27dB