Ashly neWR-5 Manual de referência do utilizador - Página 2
Procurar online ou descarregar pdf Manual de referência do utilizador para Controlo remoto Ashly neWR-5. Ashly neWR-5 6 páginas. Programmable ethernet based remote control unit
Também para Ashly neWR-5: Manual de instruções (4 páginas), Manual de instruções (4 páginas)
Imprimir página
Operating Manual - neWR-5 Remote Control for NE Products
twisted pair CAT5 cable. If using IEEE
802.3af PoE, no further power supply
is required, otherwise connect a 15-
48VDC power supply to the neWR-5
via the labelled euroblock connector.
PoE current draw is 38mA @48VDC.
If desired, wire the Lock Out con-
nector to an external remote or keyed
switch.
Upon connecting and powering up
the system, the WR-5 will have a "heart-
beat", meaning an internal small green
LED on the PCB (behind the display
bezel) will be flashing. After power
up, the LED displays "- -". If there is a
two-digit number showing in the display,
that means the WR-5 has been previously
programmed to control a zone and that
number is the gain level for that zone.
NOTE: For maximum protection against static shock disruptions to the neWR-5, mount it
to an earth-grounded metal wall box, and be sure to earth-ground it's metal cover plate as shown.
This prevents incidental static discharge from flowing through the neWR-5 or it's Ethernet cable,
potentially disrupting the neWR-5. Do not rely on the Ethernet cable ground for earth ground.
Protea NE Software
Ashly NE products installed on the network will be automatically detected and displayed in
the active device menu tree on the left side of the Protea NE software startup screen. The software
scans for active NE devices every time it loads, but the user can manually scan at any time as well
with <Scan For Devices> at the bottom of the network NE device listing. All NE devices continu-
ously broadcast their availability to the software. All currently connected and active NE products are
highlighted in green, while NE products which have been formerly installed but are currently off-line
or unavailable show up in red.
Individual NE products can be dragged onto the project canvas to simulate physical installation
groups, but editing each product can be done from either the menu tree or the project canvas. Lines,
rectangles, text, and image files can be added to create a custom virtual control screen along with NE
products and individual control objects. To see all available canvas tools, right click anywhere over
open canvas. Projects, including all device settings and canvas drawings, can be saved as a file.
Checking <Design Mode> (right-click on canvas) allows placed objects to be moved around,
while unchecking <Design Mode> locks objects in place. Once an image has been placed on the
canvas, it must be deleted by hand if that device is no longer available to the software. Scanning for
devices does not automatically remove images which may have been installed at one time but are
now off line. To clear the canvas of all devices and drawn elements click <File - New>. Further
neWR-5 help is available in Protea NE software by navigating through the online help menu.
2